Looking for jaw dropping Floor Graphics or stickers?
Did you know there is no limit as to what you can have printed on your floor graphics and stickers now-a-days?
Look at this large branded basketball court logo floor graphic picture here.
Does this giant floor sticker look like an actual real hardwood court to you?
This special promotional court floor graphic was ordered, produced and installed in less then 3 days.
The floor decal was used by a local Las Vegas automotive dealerships to run a special promotion during last March’s basketball tournaments.
Pretty cool, huh?
And now you can get you hands on realistic looking -jaw dropping floor graphics and decals too. Simply contact Signs West Outdoor today at (702) 879-8250 or use the Get Quote form in the upper the right corner of the site.
The photo you see here is a typical adhesive back floor graphic that was installed over a tile showroom floor.
But did you know, with modern advances in sign printing and floor graphic adhesives you can apply floor stickers to:
- Tile floors
- Wooden floors
- Linoleum
- Smooth concrete
- Textured concrete
- Asphalt
- Low pile carpet
- Sidewalks
- Even stairs
Depending on your floor type or ground surface and end use… there is an adhesive back vinyl that will adhere just right.
Plus all floor marketing signs and graphics are printed directly onto the floor vinyl substrates in full color.
And once your floor ad imagery is printed, a skid free over lam is applied.
The skid-free and slip-free over laminate is to code and it’s designed to prevent a slippery surface.
And as you can see, in this photo above, this floor marketing print has a nice glossy laminate that makes it look like a real wooden basketball court.
At Signs West Outdoor of Las Vegas we print floor sticker decals for your:
- Special promotions
- Corporate events
- Trade show carpet
- In-Store advertising
- Exhibit booth floors
- Business branding
- Outdoor events
- Giveaways
- Transit floor ads
- Big box retail marketing
- Sporting events and more
Plus there really is no limit to your end use, size and quantity.
For example, imagine if you’re hosting a 5k or 10k run? You can add no-slip outdoor directional arrows that stick directly onto the concrete and asphalt so runners will know where to go.
And when your event is complete, you simply peel them right back up. It’s that easy.
At the same time, your sponsors can enjoy increased exposure. You can offer to provide your sponsorship with printed logo-sticker pavement signs. And then have them applied to the surfaces that are either on or surrounding your course or event.
And the best thing about custom made floor stickers is that you may install these yourself.
How? Simply make sure the ground or floor is free of dust and grime.
Then lay down and align the vinyl floor graphic where you want it to go. It can be one single square or a contour cut piece (the shape outline of a logo, image, icon or arrow) if it’s a smaller sticker that is 40 inches in size or less.
Because floor decal substrates comes in rolls up to 40 inches wide. Which means you can have one seamless section at this width. And it can be up to 100 feet long, if not more.
However, if it is a huge logo or branded graphic like you see on basketball courts during tournament times then you can lay each piece down in sections.
Once aligned, you simply peel off the adhesive back and apply the giant floor graphic in sections.
Which means, lets assume you have a large 20′ x 10′ contour cut logo or event branded floor sticker to align and apply.
It’s OK to use masking tape to tape down the edge of one section so it acts like a hinge. You can then fold the face over (the masking tape holds the edge straight) and peel off the backing. Then slowly fold back the section over the flooring and go back and forth until the entire piece is in place.
From there, you can then align the next section and tape it down along its edge because the first section is in place and you aligned it as your starting point.
You can even use a little soapy water mix in case you want to re-align the graphic.
Floor vinyl adhesive loves water and heat.
Point being, if it’s a giant court floor graphic like in the photo above you can simply lay it down in sections. Or we can do it for you.
We installed this giant special-promotion floor decal at a local car dealership. And after we aligned all the sections on the floor… we used the same masking tape example (as shared above) to act as a hinge to keep the first section in place.
We then folded the floor decal over, peeled off the back side liner and folded it back onto the floor. It was that simple.
Think of it like this. All floor graphics are laminated with a no-slip surface for safety. Which means, floor stickers are somewhat rigid and easy to work with. The over-lam keeps each piece or section from being flimsy.
So, if you clean the surface free of dust, use a little soapy water from a spray bottle (2 small drops of dish soap in a spray bottle full of water) and spray the exposed adhesive back before laying down a section or one piece, then you can easily peel it right back up if you have an oops. No harm, no foul.
Once in place then you can use a hand held squeegee. You push down (going back and forth) removing the soapy water for a nice clean smooth look.
Plus, all floor graphic material is designed for easy removal. There will be no leftover residue or damage to your floor.
If you want more information on how you may turn your lobby, foyer, parking lot, exhibit booth, store front sidewalk, sales floor, retail store isle, check out, entryway, hallway, warehouse, production floor, office or any indoor or outdoor environment into a branded or promotional floor graphic sign, then contact Signs West Outdoor today at (702) 879-8250.
Or simply click the Get Quote or Contact button above.
Signs West Outdoor of Las Vegas can help you with your local floor graphic advertising request. And we can also custom print and ship these giant stickers nationwide -right to your door.